0086-371-67103298
Rm. 1212, Floor 12, Xiyuan Int'l, Zhongyuan Dist., Zhengzhou, Henan, China (Mainland)
Working principle of rotary sand drying equipment
The material to be dried is pushed back immediately by spiral board when enters the shell from feeding tank and feeding chute. Because the dryer is installed in slope, material flows to the back end under gravity and rotation force, meanwhile, it is lifted by board repeatedly and thrown down accordingly, which make the material form even curtain, and exchange heat sufficiently with inner the heat flow. In the end, water in the material is dried by repeatedly scattering. 
Introduction of rotary sand drying equipment
Rotary sand drying equipment is can be also called drum dryer, or dryer drum or rotary dryer machine, etc, it is a kind of drying equipment widely used in mining system. Applying to dry metal and magnetic, heavy, floating concentrate ,the clay of cement industries and the slime of coal, etc . It has an advantage of high efficiency, easy operation.
Features of rotary sand drying equipment
1.Compared to single cylinder dryer this small sand dryer length shortens 60%, in favour of process arrangement. Reduces workshop covered area, reduced the project investment by 40%. Occupation area: about 20m2.
2. Adopted latest technology, cylinder self insulation, thermal efficiency is as high as 80% (single cylinder dryer is only 35 percent), thermal efficiency than single cylinder drying saves coal 68%, yields 100%.
3. Heat-resisting wear-resisting alloy steel plate, four times than ordinary steel wear-resisting. Long service life and easy maintenance.
4. High thermal efficiency, outside shell temperature below 60 °C (single cylinder dryer outside shell temperature as high as 150°C), output of low temperature, discharging temperature below 60 °C.
5. Output of low temperature, be helpful for dust collector to use a long time, can be directly supporting air tank pulse bag filter.
6. Construction investment reduces 50%, power consumption reduces 60%.
7. Adopts roller rotation, no need reducer.
8. Hot air stove can supporting fluidezed bed, spray stove, hands burned furnace, also used in fuel and gas type, can bake the below 20 mm pieces of materials, aggregates, powder material.
9. After drying the moisture content of materials at 1-0.5% and below, which can meet different industries requirement.
Parameter of rotary sand drying equipment
Three Pass Dryer | TDS623 | TDS625 | TDS6210 | TDS6220 |
Drying Capacity | 1-3 m3/h | 4-6m3/h | 10-14m3/h | 20-30m3/h |
Diameter Of Drum | 2200mm | 2200mm | 2500mm | 2600mm |
Length | 1500mm | 2500mm | 2700mm | 3700mm |
Motor Power | 4KW | 5.5KW | 4KWX2 | 5.5KWX2 |
Reducer Model | XWD-5 | XWD-5 | XWD-5 | XWD-5 |
Speed Of Drum Rotation | 4-10r/min | 4-10r/min | 4-10r/min | 4-10r/min |
Moisture Of End Products | 0.1%-0.8% | 0.1%-0.8% | 0.1%-0.8% | 0.1%-0.8% |
Max. Temperature Inside | 700-750℃ | 700-750℃ | 700-750℃ | 700-750℃ |
Outlet Temperature | 30-60℃ | 30-60℃ | 30-60℃ | 30-60℃ |
The base surport of rotary sand drying equipment
Belt conveyor of rotary sand drying equipment
Disk feeder of rotary sand drying equipment
Linear Vibrating Screen of rotary sand drying equipment
The dryer of rotary sand drying equipment
The working site of rotary sand drying equipment
1) Unpon got your inquiry, We will reply to you in 24 hours.
2) Assist clients to prepare for the first construction scheme and supply foundation drawing.
3) Oversea installation and provide technical exchange, train client to operate the machine.
4) Supply spare and accessory parts at favorable price for long-term.
5) Spare part are original, authentic, good quality, can be available from stock, and sent to client, immediately by DHL, EMS, Fedex, and by air, guarantee client to receive it in shortest time.
1. How about the investment of this rotary dryer for silica sand?
A: Our engineer can design turnkey solution as your requirement and your budget, different dryer production line investment are difference.
2. What equipment and service you can provide?
A: We can provide you turnkey solution of small sand dryer from working site planning to transportation, installation and training, formula of dryer, after sales services, life time technical support etc.
3. What is the capacity of you’re rotary dryer for silica sand?
A: We have small sand dryer capacity from 1-30m3/h as your requirement, And also we can customize the machine for you.
4. What is the guarantee period?
A: 12 months, with in this period we provide you technical services for free.
5. Can you install rotary dryer for silica sand in my country?
A: Yes, we will send engineers to your country for guiding installation and training your workers to operate the machine.
6. If you want to know more about our dry mix mortar plant, please send us inquiry or contact us directly.
